Kohler K-3944-1-NA Guide d'installation télécharger pdf (Page 2)

Tools and Materials

Tape Measure

Safety Glasses

Painter’s Tape

Felt-tip Marker

Scissors

Utility Knife

Saw

Level

Square

Bladed Screwdriver

Clamps

Silicone Sealant

Suitable Support Framing Material [1/2″ (13 mm) Max Thickness]

Screws

Important Information

WARNING: Risk of personal injury. Metal surfaces are

sharp and can cause severe cuts. Use gloves and handle sink

edges carefully.

IMPORTANT! Before beginning this installation, refer to the

″Roughing-In″ section for cabinet dimensional requirements.

IMPORTANT! Long screws may damage adjacent cabinets. Ensure

the screws are long enough to secure the support framing, but short

enough not to extend through the inner walls of the adjacent

cabinets.

This guide provides two methods of installation: new

construction and retroﬁt. Follow the sections that apply to your

installation.

Use proper fasteners and techniques to ensure that the frame will

support a minimum of 300 lbs (136 kg). Locate the fasteners for

easy access in the event the sink needs to be removed.

For K-3935 Only: This sink is intended for installation into a

standard 30″ base cabinet.

For K-3942 and K-3944 Only: This sink is intended for

installation into a standard 36″ base cabinet.

1166708-2-B 2 Kohler Co.

1 2 3 4 5 6 7 ... 55 56

Pas de commentaire

Kohler K-3944-1-NA Guide d'installation Page 2