Kohler K-3944-1-NA Guide d'installation télécharger pdf (Page 11)

Cut the Countertop

IMPORTANT! To avoid damaging visible cabinet surfaces, cut the

countertop in the order instructed.

TIP: To prevent chipping the laminate, apply painter’s tape to the

edge of the countertop before cutting.

First, cut the countertop along the inside marked line.

Second, carefully cut away from the cutout to the marked notch

line. Use care not to damage the cabinet face.

Repeat for the other side.

Third, carefully cut in from the edge of the countertop to intersect

with the previous cut. Use care not to damage the cabinet face.

Repeat for the other side.

Proceed to the ″Install Support Rails and Sink″ section.

1. Cut inside line.

Do not cut

beyond

marked line.

2. Cut away from cutout,

flush with cabinet face.

3. Cut to intersect

with previous cut.

Do not damage

cabinet face.

Kohler Co. 11 1166708-2-B

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Pas de commentaire

Kohler K-3944-1-NA Guide d'installation Page 11