Kohler K-10087-9-CP Guide d'installation télécharger pdf (Page 4)

1. Prepare the Site

NOTE: Refer to the ″Roughing-In″ section for minimum and

maximum faucet height recommendations and mounting

information. The distance between the bottom of the spout and the

top of the ﬁxture rim must be a minimum of 1-1/2″ (3.8 cm).

NOTE: The wall plate requires special framing and support

considerations. Your installation may have different framing

requirements than the suggested framing example shown.

Construct framing for the wall plate.

Place and level the wall plate against the framing.

Mark the six screw holes, then drill pilot holes at the marked

locations.

Loosely attach the wall plate to the framing with six #10 x 1″

wood screws (not supplied).

Level the wall plate, then fully tighten the wood screws.

16" (40.6 cm)

Wood Screws

Wall Plate

5-5/8"

(14.3 cm)

Framing

1139731-2-A 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 23 24

Pas de commentaire

Kohler K-10087-9-CP Guide d'installation Page 4