Kohler K-3531-96 Guide d'installation télécharger pdf (Page 5)

3. Install the Tank

CAUTION: Risk of product damage. Handle with care.

Vitreous china can break or chip if the bolts and nuts are

overtightened, or if the product is handled carelessly.

NOTE: Do not remove the pre-assembled tank bolts from the bottom

of the tank. The nuts and washers for securing the tank to the bowl

are packaged separately.

Verify that the factory installed rubber spacers are in place on the

tank bolts.

Position the tank on the bowl by centering the gasket on the bowl

inlet.

Assemble the washers and nuts to the tank bolts.

Tighten the nuts until snug. Do not overtighten the nuts.

Verify that the tank is level both left to right and front to back.

Make sure the nuts are tight enough to achieve a watertight seal.

Tank Bolt

Gasket

Rubber

Spacer

Kohler Co. 5 1054184-2-B

1 2 3 4 5 6 7 8 9 10 ... 23 24

Pas de commentaire

Kohler K-3531-96 Guide d'installation Page 5