Kohler K-45903-2BZ Guide d'installation télécharger pdf (Page 8)

Install the Supply Adapter (cont.)

Ensure that the ﬁnished wall material has an upper supply

connection hole diameter between 1″ (25 mm) minimum and

1-1/4″ (32 mm) maximum, and the hole is centered on the outlet

of the 1/2″-14 NPT elbow ﬁtting.

If your supply connection hole diameter is between 1-1/4″ (32

mm) and 2-1/4″ (57 mm): Order the 1194302 Large

Escutcheon/Mounting Collar Kit.

Install the ﬁnished wall material.

Install the mixing valve trim and bath spout according to the

manufacturer’s instructions.

For New Construction and Retroﬁt Installations

Apply sealant tape to the supply adapter thread.

The supply adapter has an internal 3/8″ hex socket. Thread the

supply adapter into the 1/2″-14 NPT elbow using a 3/8″ hex

wrench.

1188076-2-A 8 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

Pas de commentaire

Kohler K-45903-2BZ Guide d'installation Page 8