Kohler Discovery Manuel d'utilisateur télécharger pdf (Page 16)

2.3 Mark the positions of the fixing screw

holes on the wall.

2.4 For solid walls drill two 6 mm holes for

the wall plugs.

2.5 Fit the wall plugs (supplied) and fix the

shower valve to the wall with the

securing screws (supplied).

Note! For stud partition installations

alternative fixings may be required (not

supplied) to fix the shower valve to the

rear face of the wall cavity or to a

timber noggin.

Important! At this point position the

building-in shroud onto the shower

valve and make sure that it is level,

both horizontally and vertically.

2.6 Refer to section: ‘1. Solid Wall or

Stud Partition Installation (Using

Securing Brackets - Mounting off

Front Face)’ and follow instructions 11

to 18.

Hot Supply

Cold Supply

Outlet Pipe

to Fittings

Securing

Screw

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Pas de commentaire

Kohler Discovery Manuel d'utilisateur Page 16