Kohler K-8549-SN Guide d'installation télécharger pdf (Page 4)

2. Prepare the Site

Provide an access panel for all installations.

Allow for access to the connection between the shower

high-pressure hose and the shower interlock hose.

For easiest installation, do not install the bath unit until all

soldering (except supplies) is complete. Then install the bath and

connect the supplies.

If used, install the bath spout shank at this time according to the

spout installation instructions. If possible, do not install the

ﬁnished trim until all other installations and construction are

completed.

For spouts with a supply tee: Solder in an adapter and a 1/2″

copper tube. Cap to close the extra port.

Install the valve bodies according to the valve body installation

instructions.

Loosely secure the valve bodies.

Follow the handle installation instructions to temporarily

assemble the handles in order to adjust the valves to the proper

height before connecting the lines to the diverter or supply.

Use a wrench to loosen the cartridge assembly from the diverter

body. Continue to unthread the assembly to remove.

Set the assembly aside. Protect the seals and O-rings from

becoming dirty, damaged, or misaligned.

Spout

Supply

Tee

1/2"

Nominal

Copper Cap

1/2"

Nominal

Copper

Adapter

(Supplied

with Spout)

1000588-2-C 4 Kohler Co.

1 2 3 4 5 6 7 8 9 ... 27 28

Pas de commentaire

Kohler K-8549-SN Guide d'installation Page 4