Kohler K-72218-B7-VS Guide d'installation télécharger pdf (Page 5)

2. Connect the Hoses

CAUTION: Risk of restricted waterﬂow and product damage.

Supply hoses must not be taut, kinked, or twisted during

installation. If the supply hoses must be coiled, maintain an inside

diameter of 3″ (78 mm).

Connect the Supplies

Assemble the outlet hose to the faucet.

Connect and tighten the supply hoses to the supply stops.

Place a bucket under the outlet hose.

Turn on the water supplies.

Flush hot and cold water into a bucket for 1 minute to remove

any debris.

Connect the Spray Hose

NOTICE: The weight must be installed onto the spray hose to act

as a pull stop and prevent kinking damage.

Slide the weight, then the clamp onto the spray hose.

Solenoid

Clamp

Weight

Outlet Hose

Ø 3" (76 mm)

Min

Supply

Hose

Kohler Co. 5 1186051-2-D

1 2 3 4 5 6 7 8 9 10 ... 59 60

Pas de commentaire

Kohler K-72218-B7-VS Guide d'installation Page 5