Kohler K-610-6B-KB Guide d'installation télécharger pdf (Page 5)

3. Handle Valve Installation

NOTE: The valve body marked ″Cold″ (with blue lettered tape

attached to the tube) should be installed to the right of the faucet.

Apply a bead of plumbers putty or other sealant to the underside

of the escutcheons according to the putty manufacturer’s

instructions.

From the top of the lavatory, insert the ″Cold″ and ″Hot″ valve

bodies into the mounting holes.

Install a washer and a nut onto the underside of each valve body.

Align the end bodies so the supply tubes ﬁt evenly into the valve

body outlets.

While holding the valve bodies in place, securely tighten the

locknuts with a wrench. Do not overtighten.

Remove any excess putty or sealant.

Handle

Escutcheon

Apply Plumbers

Putty.

Valve

Body

Copper

Tube

Nut

Washer

Kohler Co. 5 1000959-2-B

1 2 3 4 5 6 7 8 9 10 ... 39 40

Pas de commentaire

Kohler K-610-6B-KB Guide d'installation Page 5