Kohler K-CB-CLC3526FS Guide d'installation télécharger pdf (Page 4)

1070224-2-B

3. Attaching Side Kits to a Surface Mounted Cabinet

Fig. 4B & 4C

Fig. 5

Once Screw is bottomed out on

mount clip, turn screw an additional

5 to 7 turns to fully expand the anchor.

Side view at top of cabinet

1. Apply foam tape to Side kit bracket.

A. Peel tape from sheet, leave liner on.

B. Apply as shown to side kit brackets,

be sure they are clean and dry.

C. DO NOT PEEL RELEASE LINER

UNTIL YOU HAVE TEST FIT THE

SIDE KITS ON THE CABINET!

2. Attach the side kit brackets to the

cabinet as shown in Fig. 6.

3. Test fit the side kit , then clean the

back of the side kits with rubbing alcohol.

4. Peel the release tape from the

brackets and apply the side kits, push

fir mly to set.

5. Cover the screw heads with the screw caps.

Align top of side kit with top of flange.

Side kit bracket

(Fits tight under the

flange of cabinet)

#8 x 3/8" screws

self thread into

Side Kit brackets

2 pieces

26" high

Fig. 6

1 2 3 4 5 6 7 8 9 ... 19 20

Pas de commentaire

Kohler K-CB-CLC3526FS Guide d'installation Page 4