Kohler K-2449-F2 Guide d'installation télécharger pdf (Page 8)

5. Remove/Install the Drawer/Basket

To remove the top drawer:

Slide the release latches, located on the bottom of each rail,

backwards.

Carefully pull on the drawer until the rails are fully extended.

Remove the drawer.

To reinstall the top drawer:

Reach under the rails and slide the release latches backward.

Position the rollers on the drawer under the front end of the rails

and lift up until the rollers are in the rails.

Push the drawer in until it is fully closed. If it only goes a short

distance and stops, the release latch must be moved farther back.

Partially open the drawer and slide the release latch forward. Test

the drawer to make sure the release latch stops it before it can

disengage from the rails.

To remove the bottom drawer:

Slide the drawer out on the rails until fully extended.

Pull the right side release latch down, and push the left side

release latch toward you. Pull the drawer toward you until the

rails separate.

To reinstall the bottom drawer:

Rail

Lock

Release Latch

Basket Slide

1061207-2-A 8 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Pas de commentaire

Kohler K-2449-F2 Guide d'installation Page 8