Kohler K-T9492-4-CP Guide d'installation télécharger pdf (Page 6)

4. Install the Faceplate and Handle

CAUTION: Risk of product damage to the K-306–KS valve

assembly. When using this valve in a ﬁberglass or acrylic

installation, use the Thin Wall Installation Kit (88526).

Remove and discard the plaster guard and/or dome, if installed.

Install the faceplate onto the valve so the notch is to the bottom

and secure with screws. Do not overtighten the screws.

Install the graphics ring to the faceplate, and rotate it clockwise to

lock it in place.

Rotate the valve stem fully counterclockwise.

Fit the sleeve onto the valve.

Lever Handle

Position the handle so the lever is downward and press the

handle on the valve stem.

Secure with a lock washer and screw.

Press the cap on the knob so the dot is downward.

Round Handle

Position the knob on the valve stem and secure with a lock

washer and screw.

Install the grip ring and O-ring to the knob.

Press the cap on the knob so the dot is downward.

Valve Stem

Faceplate

Screws

Sleeve

Graphics Ring

Notch

Discard

plaster guard

with dome.

Knob

Grip Ring

Lock Washer

O-Ring

Cap

Screw

Lever Handle

Valve Stem

Lock Washer

O-Ring

085723-2-AE 6 Kohler Co.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Kohler K-T9492-4-CP Guide d'installation Page 6