Kohler K-6546-3-96 Guide d'installation télécharger pdf (Page 6)

1015927-2-B Kohler Co.



Finished Wall3 or 4 Faucet Holes

Min. Cut-out If Using

K-5984 Cutting Board

Countertop

Sink

Cut-out

“Y”

2” R. Max.

(Sharp Corner

Optional)

1-1/2” (3.8cm) Min.

31”

(78.7cm)

7. Drill required faucet hole locations (number of holes drilled will be

determined by the fitting being used) and install faucet to

countertop according to manufacturer’s instructions.

8. Clean the top of the sink rim, making sure surface is free from

debris. Clean the bottom of the countertop around the cut-out

area, making sure surface is smooth and free of defects.

9. Apply a generous bead of sealant around the sink rim (where sink

rim and countertop meet).

10. Position the countertop over the sink, being careful the sealant

provides a complete seal between sink rim and bottom of

countertop. Immediately wipe away any excess sealant with a

damp cloth. Fill any voids between rim and countertop with

sealant.

11.Sealing gap between apron and cabinet is optional.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Pas de commentaire

Kohler K-6546-3-96 Guide d'installation Page 6